Why not make a Start on that AtomMiner Farm with our 8x Mini-Farm!
The AtomMiner AM01 is a totally revolutionary efficient FPGA Cryptocurrency Miner. This ground-breaking design has been meticulously forged and perfected over the last few years by the highly Talented Team at AtomMiner to ensure that cryptocurrency mining is still possible even when other devices such as Graphics Processing Units (GPU’s) are struggling to make a profit. This is getting worse!
As you should already be aware, the price of energy like Electricity and Gas has rocketed in the UK and other regions around the world recently, making it a tight situation to ensure profit whilst mining cryptocurrency. Energy prices are continuing to go up!
The AtomMiner AM01 is an FPGA hardware miner designed to work 24/7 in fully automatic mode and run-in continuous operation. For everyone interested in cryptocurrency, from Beginners to Experts, this is a simple setup, one-click and effortless way to start mining cryptocurrencies. The AtomMiner AM01 comes with the lowest possible power consumption and one of the best Hash-to-Watt Ratios on the market.
In addition, AtomMiner has decided to go one step further and provide an entire infrastructure for the miners to make things even easier! The complete plug and play setup can be installed without any additional software, third party tools or programming knowledge making this Number One choice for new and seasoned miners alike!
In our minds this is a ‘no brainer’ and the Future of Cryptocurrency Mining!
AtomMiner AM01 Features
- Xilinx 7 Series FPGA inside
- Automatic FPGA reconfiguration
- Almost instant FPGA configuration with soft start to lower energy consumption
- True Scalability with no interruption
- Hot-Swap and Plug-and-Play support
- Hash rate comparable to GPU at only approximately 1/10 or less power consumption
- True USB2.0 / USB3.0 communication interface
- Minimum requirement for the host computer /SoC
- Universal 12 VDC power input
- Low Power consumption
- Small & Lightweight
- Virtually Silent Operation
- 1 Year Warranty
- State-of-the-art Software designed exclusively for AtomMiner
- Every host PC can control up to 64 miners simultaneously
- We advise using the Orange Pi various models.
- We support Raspberry Pi 2 / 3 / 4 right out of the box. Raspberry Pi 1 and Raspberry Pi Zero are not supported as of version 1.0.3RC9
- Miners can be connected and disconnected without interrupting mining
- Seamless integration with AtomMiner Pool and other services
- Detailed and Realtime mining statistics
- Pre-configured downloadable OS images
- Free lifetime software and firmware updates
- No dev fees
- Unsurpassed Portability
- Virtually No Heat
- Constant updates
- Active Developers
Why AtomMiner?
Our miners have multiple advantages over traditional GPU’s or even ASIC’s miners:
- Low power consumption (just a fraction of GPU or ASIC power usage)
- Minimal requirements for the host computer
- Completely reconfigurable (unlike ASICs) and constantly updated
- On-the-fly algorithm switching
- Stability allowing unattended operation
With under 20 Watts of power consumption, you will get comparable hashing power to, as of right now, a stock 1070Ti GPU which would draw approximately 150-175 Watts depending on the algorithm. Another downside of using GPU miners is the price of the host computer, which is recommended to have at least i3 CPU, 4GB of RAM and at least 4-6 PCIe lanes to plug in mining cards. Most of the computer systems won’t let you host more than 8-10 GPU card at once.
The AtomMiner AM01 miner is solving this problem in a graceful way allowing any computer board (ARMv7 or better) with internet access, USB and Linux OS can be used to control up to 64 miners at once, which will drop your total price of the PC hardware to almost Zero. Our tests show that a single Orange Pi or Raspberry Pi costing from *£15 to *£60 is good enough to control miners and provide true scalability.
Another benefit of using AtomMiner AM01 miners is that it can be easily setup in the office or even in the living room because they are producing exceptionally low heat and noise.
The Bottom Line
Typical entry level mining rig could cost you about *£5800+ (e.g. 6 x Nvidia 30xx GPU’s, power supply’s, motherboard, CPU, RAM, risers, HDD) while you can get similar hashing power with an AtomMiner AM01 at approximately *£3800.
By switching over to the AtomMiner AM01 you will not only save on your electric bill but can also cut the need of mid-grade control computer unit and expensive power supplies while keeping your mining space chill and quiet.
Current AM01 Hash rate Comparison
Hash rate is provided for the stock, not overclocked or Modified GPU cards:
Algo: Keccak / Keccak-C / SHA-3
Device | Hash rate | Power | MHash per Watt |
---|---|---|---|
Nvidia GTX 750i | 140MH/s | 60W | 2.33 |
Nvidia GTX 1070 | 480MH/s | 150W | 3.42 |
Nvidia GTX 1080 Ti | 700MH/s | 300W | 2.33 |
AMD R9 380 | 180MH/s | 215W | 0.84 |
AMD RX 470 | 215MH/s | 140W | 1.54 |
AMD RX 580 | 310MH/s | 225W | 1.38 |
AtomMiner AM01 | 600MH/s | 16.9W | 35.7 |
‘Let’s do the Maths’
The Nvidia GTX 1080 Ti = 700MH/s @ 300Watts
Divide the Watts from the AtomMiner into the Watts on the GPU – GPU 300Watts / AtomMiner 16.9Watts = 17.75 (lets say 17 to be in your favour!)
Multiply the Hashrate of the AtomMiner by the output above – AtomMiner 600MH/s x 17 = 10200MH/s
We have tried to simplify this as much as possible but the bottom line is for the same Wattage as the Nvidia GTX 1080 Ti (300Watts) you can have 17 AtomMiners running at 600MH/s each!
That outputs 10200MH/s using 300Watts approx. with the AtomMiner
We hope this helps!
Algo: Blakecoin
Device | Hash rate | Power | MHash per Watt |
---|---|---|---|
Nvidia GTX 750i | 800MH/s | 74W | 15.99 |
Nvidia GTX 1070 | 4930MH/s | 180W | 27.5 |
Nvidia GTX 1080 Ti | 8030MH/s | 280W | 28.78 |
AMD R9 380 | 2100MH/s | 205W | 10.25 |
AMD RX 470 | 2339MH/s | 135W | 17.33 |
AMD RX 580 | 3620MH/s | 175W | 20.69 |
AtomMiner AM01 | 1200MH/s | 13W | 92.31 |
Currently Supported Algorithms and Coins
Algo | Version | Hash rate | Power | Release date |
---|---|---|---|---|
Keccak/Keccak-C | 1.4 | 600MH/s | 16.9W | January 2022 |
SHA256 | 1.1 | 500MH/s | 16W | April 2019 |
Blakecoin | 1.2 | 1200MH/s | 13W | February 2019 |
Gr0estl | 1.1 | 32MH/s | 10W | July 2019 |
Skein2 | 1.0 | 44MH/s | 6.7W | June 2019 |
Myriad | 1.0 | 32MH/s | 9.8W | July 2019 |
sha256t | 1.0 | 180MH/s | 10W | July 2019 |
sha256q | 1.0 | 150MH/s | 11W | July 2019 |
odocrypt | 1.3 | 50MH/s | 7.2W | July 2019 |
blake2s | 1.0 | 1200MH/s | 12W | September 2019 |
blockstamp | 1.0 | 300MH/s | 15W | October 2019 |
tribus | 1.0 | 30MH/s | 10W | December 2019 |
blake2b (GLT) | 1.0 | 250MH/s | 10W | May 2020 |
blake2b (TNET) | 1.0 | 250MH/s | 11W | May 2020 |
K12 (AEON) | 1.0 | 800MH/s | 13W | July 2021 |
*Prices are based on the average price from Amazon at the time of writing or approximations of the quoted statements after various test environments. Please do expect fluctuations based on the time of writing to reading, market conditions and any other uncontrollable scenarios.
Errors and omissions excepted.